UTM-2000D 2000kN Computer Controlled
Electro-hydraulic Servo Universal Testing Machine
1.Application
Computer Control Electro-Hydraulic Servo Tensile Testing Equipment is equipped with computer, printer, and general test software, to give an accurate determination of metal the material tensile strength, yield strength, the provisions of non-proportional extension strength, elongation, elastic modulus mechanical properties. Test results can print (force - displacement, force - deformation, stress - displacement, stress - deformation, force - time distortion - time) six kinds of curves and related test data, with the software self-test function that can self-diagnose problems. It is ideal testing equipment for the industrial and mining enterprises, scientific research units, universities, engineering quality supervision station. They are perfect testing instrument project quality testing section, universities and colleges, research institution and industrial and mining.
2. Standard:
ASTM E8: Standard Test Methods for Tension Testing of Metallic Materials
ASTM E4 -16 Standard Practices for Force Verification of Testing Machines
ISO6892-1:2016 Metallic materials — Tensile testing — Part 1: Method of test at
room temperature
ISO75000-1:Metallic materials--Verification of static uni-axial testing machines--Part 1:
Tension/compression testing machines--Verification and calibration of the force-measuring system
3. Main Technical Parameters:
| Model | UTM-2000D |
| Load accuracy | Class 1 (class 0.5 optional) |
| Load range | 1%-100%FS (0.4%-100%FS optional) |
| Load resolution | 1/500000 |
| Deformation Measurement Range | 0.2%～100%FS |
| Deformation accuracy | ≤±1 % (≤±0.5% optional) |
| Displacement resolution | 0.01mm |
| Displacement accuracy | ≤±1 % (≤±0.5% optional) |
| Displacement error | ≤±1 % |
| Stress Control Speed | 1～45 Mpa/s |
| Stress Control Speed | 0.001～0.5 mm/s |
| Displacement Control Speed | 0.02～3 mm/s |
| Constant load, deformation and displacement control accuracy | When rate <10% FS, the precision± 1% When rate ≥ 10% FS, the precision ±0.5％ |
| Stress rate accuracy | When rate < 0.05% FS/s, the precision± 2% When rate ≥ 0.005%FS/s, the precision ±0.5％ |
| Piston Stroke | 250mm |
| Max. tension test space | 900mm |
| Max. Compression test space | 900mm |
| Column distance | 770mm |
| Clamping method | Hydraulic Automatic Clamp Fixture |
| Column diameter | 90mm |
| Screw diameter | 120mm |
| Round Jaws clamping range | Φ13-Φ70mm |
| Flat Jaws clamping range | 0-40mm |
| Width of Jaws | 100mm |
| Compression plate | Φ225mm |
| Diameter of Bending roller | 50mm |
| Bending span | 450mm |
| Power supply | 3-phase, 380V, 50HZ 4.5kw (can be customized) |
Packing size and weight
| Model | UTM-2000D |
| Main body size | 1160*850*3300mm |
| Oil control cabinet | 1200x600x750mm |
| Total weight of Gross weight | 9000kg |
4. Main Unit Feature:
4.1 Rigid in block cast base with fuel tank mounted under the host and upper space for tensile and lower one for compression and bending test
4.2 Solid four columns and two screws design guarantees the strong stability for the machines.
4.3 Middle beam adopts adjustable gap screw-nut mechanism, eliminating the gap and improving the measurement performance.
4.4 Italian imported gear pump features high pressure and low-noise as with working pressure up to 33MPa, the system maximum actual pressure of 28MPa.
4.5 With reference to hydraulic system, the electromagnetic valve, relief valve, pressure relief valve, valve pressure and other hydraulic components are applied well-known brands. Servo valve, as the corn parts, applies Atos Brand.
4.6 Load automatic withstanding, stress, strain control, cycle control and self-programming. 4.7 Precise load sensor for guarantee accurate and stable measure
4.8 Overload protection: Emergency stop switch, overload limiter, ram-stroke limiter, hydraulic pump motor over-current & over heating protection, leak / over current protection, automatic stop control, safety Guard.
5. Main Configurations list
6. Data Acquisition systems
61. The data acquisition system of machine consists of two high precision A/D conversion channel and the maximum resolution should be 1/300000 (minimum)
6.2. USB powered data –logger with USB 2.0 and RS- 232 pc interface, 5-keys joystick, 2MB RAM, Automatic recognition facility, Internal signal generator and 12-bit conversion resolution
7 Software
7.1 Batch and report processing program facility in doc and exl format
7.2 The software is fully compliance with the corresponding international standards like ISO, ASTM and GB standards
7.3 The control mode of software should contain constant force, constant displacement, constant deformation and others like Stress - strain, force - displacement, force - time, displacement – time
7.4 It supports multiple load cell and extensometer
7.5 Reserved data interface facility, which can be directly connected to integrated management network of laboratory.
7.6 The software is for Windows98/2000/XPAV in7 o higher
7.7 The software supports Real-time record and dynamic display test curve
7.8 The software adopts human-computer interaction to analyze and count performance indicators of materials.
7.9 The software can automatically figure-out routine data such as tensile strength, yield strength, modulus of elasticity, extend rate after rupture, non-proportional extend strength etc.
FAQ
1. Are your company a trading one or a factory?
Factory + trading company (integration), 21 years focusing on test instruments field, 5 years exporting experience.
2. After an order is placed, when to delivery?
Generally about 15 working days, If we have inventory, we can arrange shipment within 3 working days.
Please be aware that our production lead times depend on specific items and item quantities.
3. What about the warranty with after - sales services?
12 months warranty after delivery. Besides,we can help you to repair your problem controller freely,even it's not from our factory. What you need to do is to send us the controller.
After the warranty, the professional after-sale service team will provide perfect technical support,and help customer solve problems encountered while using our product, handles guest problems and complaints in
a professional and timely.
4. What about the services and product' quality?
Each instruments must be carried out 100% quality examination and test when shipping and delivery goods.
Product use training, each of our product provide video training to show you how to install & operate.
All the products meet with: ISO, ASTM, AATCC, BS, EN, DIN, JIS and other required standards.
Product Tags:
|
|
Durable Electromechanical Universal Testing Machine 2000kN Computer Controlled Images
|
